Measurement Computing DaqBoard 1000 Series - Manual (Page 78)

6-4 Specifications – DaqBoard/1000 Series 889094 Note: Specifications subject to change without notice.
Frequency/Pulse Generators Applicable to DaqBoard/1000, /1005
Channels: 2 x 16-bit
Output Waveform: Square wave
Output rate: 1 MHz base rate divided by 1 to 65535 (programmable)
High level output voltage: 2.0 V minimum @ -3.75 mA, 3.0 V minimum @ -2.5 mA
Low level output voltage: 0.4 V maximum @ 2.5 mA
Accessories and Cables Applicable to DaqBoard/1000, /1005
Termination Board (TB-100)
Termination board with screw terminals for accessing all I/O for one DaqBoard/1000 or
DaqBoard/1005. The terminal board connects to the DaqBoard/1000 Series board’s 68-pin
connector via a CA-G56 cable.
Rack Mount Kit (Rack3)
This is a kit for mounting the TB-100 termination board to a rack.
68-Conductor Cable (CA-G56)
68-conductor, 3 ft. shielded cable. Used to connect a TB-100 terminal board to a DaqBoard/1000 or
a DaqBoard/1005.
Manual Set (Set #1033), p/n 1033-0900
This is a hardcopy set of the following 3 manuals, available for purchase.
o
DaqBoard/1000 and /2000 Series User’s Manual (p/n 1033-0901)
o
Programmer’s Manual for developing custom programs using API commands (p/n 1008-0901)
o
DBK Option Cards & Modules User’s Manual (p/n 457-0905)
Note: DaqBoard/1000 Series boards do not support DBK options.
Software
Applicable to DaqBoard/1000, /1005
DaqView for setup, data acquisition display and analysis.
DaqViewXL for seamless execution within Microsoft Excel’s tool palette.
eZ-PostView for post acquisition viewing and analysis.