Connections – Measurement Computing DaqBoard 1000 Series User Manual
Page 30
1-8 Daq Systems and Device Overviews
889094
DaqBoard/1000 and /2000 Series User’s Manual
DaqBoard/1000 Block Diagram
Connections
Installation
Reference Note:
For the DaqBoard/1000 installation procedure, refer to the DaqBoard/1000 and /2000 Series
Installation Guide. A copy of the guide is included at the beginning of this manual.
I/O Connectors
All input and output signals are available at the board’s 68-pin SCSI III connector. Chapter 2 includes a
pinout. The following cable and terminal board options can be used to provide convenient screw terminal
connections for all signal I/O lines.
Mating Cable: The CA-G56 is a 68-conductor shielded cable. It is used to connect a DaqBoard/1000
Series board to a TB-100 termination board. The cable length is 3 feet.
TB-100:
TB-100 is an optional termination board. It provides convenient screw terminal
connections for all signal I/O lines of a DaqBoard/1000 Series board.
Reference Note:
The TB-100 terminal board connection option is discussed in chapter 2.