Measurement Computing DaqBoard 1000 Series - Manual (Page 57)

DBK209
The DBK209 is a mini-adapter board suitable for both
analog and digital expansion. The board provides three
DB37 connectors (P1, P2, and P3).
DBK209 connects to DaqBoard/2000 Series or /2000c Series
P4 connector via a CA-195 cable.
Other than the form factor, DBK209 is identical to DBK201.
• P1 is used for ANALOG I/O.
• P2 is used for DIGITAL I/O.
•
P3 is used for Pulse/Frequency (Digital and
Counter/Timer) I/O.
DBK209’s P4 (100-pin connector) connects to the
DaqBoard/2000 Series or /2000c Series board’s P4
connector via a CA-195 Cable.
DBK209
P4-to-P1/P2/P3 Mini-adapter Board
DBK210
DBK210 is a four-bank carrier board for optically-isolated Grayhill 70M-Series mini-modules. Each
bank supports up to eight digital I/O modules. Each bank can be independently set to input or output.
The settings are made via micro-switches. The Grayhill 70M-Series I/O modules are industry
standard, 5-volt logic level modules.
DBK210 boards are typically installed in NEMA-type panels; however, they can be installed on DIN
rails. Separate mounting instructions are included with Rack Mount Kit (part no. Rack-DBK-3) and
with DIN-rail Mount Kit (part no. DIN-DBK-1).
DBK210 boards contain three DB37 connectors, as follows: two P2 connectors for daisy-chaining to
other DBK210s or to other P2-supported devices; one P1 connector for convenient access to the
analog input channels of a DaqBook/2000 Series or a DaqBoard/2000 Series device.
DBK210 Carrier Board for Grayhill 70M-Series Mini-Modules
DaqBoard/1000 and /2000 User’s Manual 898195 Connections & Pinouts, DaqBoard/2000 Series 3-7