Measurement Computing DaqBoard 1000 Series - Manual (Page 52)

The following matrix provides a quick comparison of the DBK200 Series adapter boards. Details for each
board are provided in the DBK Option Cards and Modules User’s Manual (p/n 457-0905). An illustration and
brief discussion of each DBK200 Series adapter board is presented after the following table.
DBK200 Series, Adapter Board Matrix
DBK P1
Analog
P2
Digital
P3
Pulse,
Freq.,
Digital
P4 Screw
Term-
inals
Special
Features
Comments
200 Yes No No Yes No No Analog I/O use only.
201 Yes Yes Yes Yes No No Like DBK209, except for form-factor.
202
203
204
Yes Yes 40-pin
header
for P3
Yes Yes Custom RC
Filter Setup.
DBK202 is a bare board. DBK203
consists of a DBK202 mounted in a
chassis. DBK204 consists of a DBK203
and a CA-209 CE cable kit.
205 No No 12
screw-
term.
Yes Yes No Only used with DaqBoard/2003 or /2003c.
Can plug directly into P4. Screw terminals
are related to P3.
206 Yes Yes Yes Yes Yes No Similar to DBK202, but has a different
form-factor and has no RC filter setup.
207
207/CJC
Yes
(Qty. 2)
No No Yes Yes Can carry
5B modules.
Supports 5B-compatible Analog I/O
modules. DBK207/CJC includes Cold
Junction Compensation. Includes two P1
connectors. Screw terminals are for 5B
module connections.
208 No Yes
(Qty. 2)
No Yes Yes Can carry
relay modules.
Supports Opto-22 compatible Solid-State-
Relay (SSR) digital modules. Includes two
P2 connectors.
209 Yes Yes Yes Yes No No Like DBK201, except for form-factor.
210 Yes Yes
(Qty. 2)
No Yes Yes Can carry
digital I/O
modules.
Supports 32 channels of digital I/O via
Grayhill TM 70M-Series mini-modules.
DBK200 Series, P4 Connector Options
Reference Note: Prior to connecting a DBK to a DaqBoard/2000 Series or /2000c Series board, refer to
the applicable DBK document module(s), in the DBK Option Cards and Modules User’s Manual
(p/n 457-0905). During software installation, the manual is automatically installed onto your hard drive as
a part of product support. The default location is the Programs directory, which can be accessed through
the Windows Desktop.
DBK200
The DBK200 P4-to-P1 adapter board provides a DB37 P1
connector.
P1 is suitable for ANALOG/IO.
DBK200 does not support Digital I/O or frequency signals.
DBK200’s P4 (100-pin connector) connects to the DaqBoard/2000
Series or DaqBoard/2000c Series board’s P4 connector via a
CA-195 Cable.
DBK200 Adapter with P1
3-2 Connections & Pinouts, DaqBoard/2000 Series 898195 DaqBoard/1000 and /2000 User’s Manual