Measurement Computing DaqBoard 1000 Series - Manual (Page 48)

TB-100 Terminal Connector Option
The TB-100 Terminal Connector option can be used to connect all
signal I/O lines that are associated with a DaqBoard/1000 Series
device. TB-100 connects to the DaqBoard’s 68-pin SCSI III
connector via a shielded 3 ft., 68 conductor cable, p/n CA-G56.
TB-100 Pinout The “Pin” column refers to the pin no. on the 68-Pin SCSI III Connector.
TB2 Side Pin TB1 Side SE DIFF Pin
+5V Vcc (+5 VDC) 19 ACH0 Analog Input CH 0 0 HI 68
GND Digital Common Note 1 ACH8 Analog Input CH 8 0 LO 34
A0 Digital I/O Line A0 18 AGND Analog Com Note 2
A1 Digital I/O Line A1 52 ACH1 Analog Input CH 1 1 HI 33
A2 Digital I/O Line A2 17 ACH9 Analog Input CH 9 1 LO 66
A3 Digital I/O Line A3 51 AGND Analog Com Note 2
A4 Digital I/O Line A4 16 ACH2 Analog Input CH 2 2 HI 65
A5 Digital I/O Line A5 50 ACH10 Analog Input CH 10 2 LO 31
A6 Digital I/O Line A6 15 AGND Analog Com Note 2
A7 Digital I/O Line A7 49 ACH3 Analog Input CH 3 3 HI 30
B0 Digital I/O Line B0 14 ACH11 Analog Input CH 11 3 LO 63
B1 Digital I/O Line B1 48 AGND Analog Com Note 2
B2 Digital I/O Line B2 13 ACH4 Analog Input CH 4 4 HI 28
B3 Digital I/O Line B3 47 ACH12 Analog Input CH 12 4 LO 61
B4 Digital I/O Line B4 12 AGND Analog Com Note 2
B5 Digital I/O Line B5 46 ACH5 Analog Input CH 5 5 HI 60
B6 Digital I/O Line B6 11 ACH13 Analog Input CH 13 5 LO 26
B7 Digital I/O Line B7 45 AGND Analog Com Note 2
C0 Digital I/O Line C0 10 ACH6 Analog Input CH 6 6 HI 25
C1 Digital I/O Line C1 44 ACH14 Analog Input CH 14 6 LO 58
C2 Digital I/O Line C2 9 AGND Analog Com Note 2
C3 Digital I/O Line C3 43 ACH7 Analog Input CH 7 7 HI 57
C4 Digital I/O Line C4 8 ACH15 Analog Input CH 15 7 LO 23
C5 Digital I/O Line C5 42 AGND Analog Common Note 2
C6 Digital I/O Line C6 7 SGND Low Level Sense Common 62
C7 Digital I/O Line C7 41 POSREF +5 VDC Positive Reference 20
TTLTRG TTL Trigger Input 6 AGND Analog Common Note 2
GND Digital Common Note 1 NEGREF - 5 VDC Negative Reference 54
CNT0 Counter Input CTR0 5 AGND Analog Common Note 2
CNT1 Counter Input CTR1 39 XDAC0 Analog Output, DAC0 22
CNT2 Counter Input CTR2 4 AGND Analog Common Note 2
CNT3 Counter Input CTR3 38 XDAC1 Analog Output, DAC1 21
TMR0 Timer Output 0 3 AGND Analog Common Note 2
TMR1 Timer Output 1 37 XAPCR A/D Pacer Clock I/O 2
XDPCR DAC Pacer Clock I/O 1 GND Digital Common Note 1
GND Digital Common Note 1 EGND Earth Ground N/A
Note 1: Digital Common Pins on the SCSI III connector are: 35, 36, and 40.
Note 2: Analog Common Pins on the SCSI III connector are: 24, 27, 29, 32, 56, 59, 64, and 67
2-2 Connections & Pinouts, DaqBoard/1000 Series 889094 DaqBoard/1000 and /2000 Series User’s Manual