Leprecon XC 350 - Manual (Page 80)

XC Users Manual
Page 80
808030
6.8 Setting Position
The Position controls in XC are used to set the attributes related to positioning a
fixture.
Position labels are different from Color and Beam labels in two important ways:
1 ) To illuminate the same spot on stage, the Pan and Tilt values are different for
each fixture. The user must create focus positions for each fixture before
programming.
2) For this reason, there are no pre- defined ‘Position’ labels in the XC fixture
library.
To create Position Labels:

From the Run screen, select fixtures and adjust intensity.

Click on Details or press the Shamrock key to open the Details screen.

Click on the Position tab. The screen below will be shown: