Leprecon XC 350 - Manual (Page 64)

XC Users Manual
Page 64
646430
6.2 Details About the Details Screen
The ‘Details’ screen is the entry point to setting intelligent fixture attributes.
There’s a lot of tools available here, so it makes sense to take a closer look.
From the top, the Details screen contains Fixture Tabs for different fixture types.
Since different fixture types can have diverse functions and control requirements,
the Details screen has individual tabs for each type. Settings made in any tab are
preserved when tabs are changed, so switching from tab to tab at any time is
fine.
As with the Run screen, Fixture Select buttons are available from the Details
screen. Selected fixtures are highlighted in green. Select and deselect fixtures as
needed, deselecting a fixture does not change any fixture settings.
Set level for selected fixtures using the Intensity Fader.
The Fixture Status shows at a glance how each fixture is set. If there is no data
in the grid, there will be no change to that fixture in the scene you are creating.
Fixture Tabs
Intensity
Fader
Fixture Select
Fixture
Status