Leprecon XC 350 - Manual (Page 46)

XC Users Manual
Page 46
464630
4.3 Control Features
XC Control Features send special commands to intelligent fixtures. These
commands are used to turn on and off the lamps in the fixture, and to reset
(home) the fixture. Not all automated fixtures support control features, and in
some cases it’s possible to disable control features at the fixture itself, so board
commands would be ignored in this case.
To use Control Features:
1. From the Setup screen, click on Control Features. Selecting a fixture type
from the list of fixtures in your show will display the control features
available for that fixture type.
2. Select the control feature, and XC will show a list of individual fixtures.