Leprecon XC 350 - Manual (Page 56)

XC Users Manual
Page 56
565630
When selected, the channel intensity level can be set using the on-screen Level
fader on the left side of the screen, or the front panel edge wheel. A group of
channels can be selected by ‘dragging’ across a row of indicators.
Once levels are properly s et, press ‘release’ on the keypad or on screen to leave
the selection at their current level. New fixtures can be selected to continue
building a look on stage.
To clear all selected channel levels (set intensity level to zero); press the ‘Clear’
key.
To clear ALL manual channels (selected and deselected), press and hold ‘Clear’,
then press ‘Enter’.
Note: Clearing channel intensity DOES NOT change fixture attributes such as
Color, Beam or Position.
5.3 Using the Channel Dialog keys
Keys on the XC front panel can be used to enter channel values using a simple
syntax. To begin, press the ‘channel’ key. A dialog box will open on screen.