Leprecon XC 350 - Manual (Page 109)

XC Users Manual
Page
109
10910930
Cue Stack
Scripted shows are well suited to the Cue Stack controls of the XC-350. The Cue
Stack offers timing for all cue properties, and single ‘GO’ button show control.
10.5 Recording cues
XC can save and playback up to 999 cues. Point Cues can be inserted between
two whole numbered Cues. This is useful for editing in additional cues after the
Cue stack has been recorded.
Each cue has independent up and down fade times for intensity. If desired, each
cue can have associated delay and follow times. The entire Cue Stack can be
turned off if XC is used only for Playback, Submaster and Quick Look control.
When recording new cues, it’s best to turn OFF the Cue stack. Otherwise any
existing cue data will be present in the board output, and re-recorded into cues.
1) Select fixtures, and set Color, Beam and Position as previously described.
2) Press or click the ‘Record’ button. The Record dialog box will open: