Grandstream GVC3200 Administration Guide - Manual (Page 60)

Firmware Version 1.0.1.5 GVC3200 Administration Guide Page 59 of 61
FACTORY RESET
Users could reset GVC3200 to factory settings via the following ways: Reset via local GUI, via Web page,
via the reset hole on the back panel of GVC3200. Factory reset will delete configuration info and syslog
info.
--------------------------------------------------------------------------------------------------------------------------------------------
Warning:
1. Factory reset will erase all GVC3200 configuration information. Please back up all settings or print
useful information before making the following operations. If users lose all parameters or records,
Grandstream will not take responsibility for the damage or loss.
2. After factory reset, the remote control will not be paired to GVC3200 anymore. Please go to GVC3200
LCD settings->Network->Bluetooth, select the menu buttons on the upper right and click "Search New
Devices". GVC3200 remote control “GS-RCU” with last 4 digits of the remote control MAC address
will show in the available device list. Select it to start pairing process on GVC3200, immediately
followed by pressing OK+5 keys on the remote control at the same time. The remote control will be
paired and connected to GVC3200 again.
--------------------------------------------------------------------------------------------------------------------------------------------
RESET VIA LCD
Go to GVC3200 LCD idle screen->Settings->Maintenance->Factory Reset, click on the "Reset" button to
bring up the prompt box as shown below. Click "OK" to reboot the device and restore factory settings.