Grandstream GVC3200 Administration Guide - Manual (Page 21)

Firmware Version 1.0.1.5 GVC3200 Administration Guide Page 20 of 61
• Fowarding Routes
Fill in forwarding routes, for example,10.0.0.0/8.
VLAN
• Layer 2 QoS 802.1Q/VLAN Tag
Assign the VLAN Tag of the Layer 2 QoS packets for LAN port. The default value is 0. Please do not
change VLAN settings before understanding the network VLAN settings or consulting your network
administrator. Otherwise, the device might not get the correct IP address.
• Layer 2 QoS 802.1p Priority Value
Assign the priority value of the Layer2 QoS packets for LAN port. The default value is 0.
LLDP
• LLDP
If checked, the GVC3200 will obtain network policy settings such as VLAN and QoS parameters from
the switch that has LLDP turned on for the network. The default setting is "Yes".
• Layer 3 QoS for SIP
Manually configure the Layer 3 QoS parameter for SIP packets. This value is used for IP Precedence,
Diff-Serv or MPLS. The default setting is 48.
• Layer 3 QoS for Audio
Manually configure the Layer 3 QoS parameter for audio packets. This value is used for IP
Precedence, Diff-Serv or MPLS. The default setting is 48.
• Layer 3 QoS for Video
Manually configure the Layer 3 QoS parameter for video packets. This value is used for IP
Precedence, Diff-Serv or MPLS. The default setting is 48.
802.1X
• 802.1x Mode
Allows the user to enable/disable 802.1x mode on the device. Configure 802.1x authentication when
connecting to the authentication server. The default setting is "Close".
• Identity
Enter the Identity information for the 802.1x mode.
• MD5 Password
Enter the MD5 Password for the 802.1x mode.
• CA Certificate
Upload the CA certificate for the 802.1x mode.