Remote control upgrade – Grandstream GVC3200 Administration Guide User Manual
Page 59
Firmware Version 1.0.1.5
GVC3200 Administration Guide
Page 58 of 61
“Admin Password” in the Web GUI->Maintenance->Web/SSH Access page. For a detailed parameter list,
please refer to the corresponding firmware release configuration template in the following link:
When the GVC3200 boots up, it will issue TFTP or HTTP request to download a configuration XML file
named "cfgxxxxxxxxxxxx" followed by "cfgxxxxxxxxxxxx.xml", where "xxxxxxxxxxxx" is the MAC address
of the phone, i.e., "cfg000b820102ab" or "cfg000b820102ab.xml". If downloading "cfgxxxxxxxxxxxx.xml"
file is not successful, the provision program will download a generic cfg.xml file. The configuration file
name should be in lower case letters. For more details on XML provisioning, please refer to the following
document:
REMOTE CONTROL UPGRADE
When GVC3200 detects a new firmware version for the connected Bluetooth remote control, a prompt
box will pop up on screen to remind users whether to upgrade the remote control. Tap on OK to upgrade,
or tap on CANCEL to reject.
Users could also check remote control firmware update manually in LCD menu->Settings->Status-
>Remote Control and click "Check for Updates". If there is a new version, follow the prompts on the
screen to download remote control update and upgrade. Network connection and remote control
connection will be temporarily lost during remote control upgrade. Both connections will be restored
automatically once upgrading is done.
--------------------------------------------------------------------------------------------------------------------------------------------
Note:
Please do not cut of GVC3200 power supply or remove remote control battery during remote control
upgrading process. Otherwise, the upgrading process will be interrupted and upgrading will fail.
--------------------------------------------------------------------------------------------------------------------------------------------