Grandstream GVC3200 Administration Guide - Manual (Page 19)

Firmware Version 1.0.1.5 GVC3200 Administration Guide Page 18 of 61
--------------------------------------------------------------------------------------------------------------------------------------------
Note:
Please backup the important files or settings before factory resetting.
--------------------------------------------------------------------------------------------------------------------------------------------
REBOOT
• Reboot
Click the REBOOT button to reboot device.
NETWORK
Users can configure Ethernet, Bluetooth, Wi-Fi, VPN, VLAN, LLDP and 802.1x under Network settings
here. Most of the configurations here such as Bluetooth, Wi-Fi and VPN settings are not available in web
UI.
BLUETOOTH
• Paired Devices
Display paired devices such as Bluetooth remote control, Android mobile phone or speaker
• Available Devices
Display all devices in the search range which have enabled Bluetooth.
ETHERNET
Click on IPv4 Settings to edit Ethernet settings on GVC3200. By default DHCP is used for the GVC3200
to obtain IP address from LAN network.
• Address Type
Allow users to configure the appropriate network settings on the device. Users could select "DHCP",
"Static IP" or "PPPoE". By default, it is set to "DHCP".
• IP Address