Grandstream GVC3200 Administration Guide - Manual (Page 25)

Firmware Version 1.0.1.5 GVC3200 Administration Guide Page 24 of 61
• VGA In
Configure the offset location of VGA input. When set the image shift to "Horizontal Offset",
configure the horizontal offset of VGA input here; when set the image shift to "Vertical Offset",
configure the vertical offset of VGA input here. The parameter range is from -60 to 60. The
default setting is 0.
•
Sampling Phase
After VGA input is plugged in and VGA input is displayed on the HDMI output device, if color
distortion occurs, you can manually adjust sampling phase from 0 to 32. Usually the same color
presented on VGA display device and HDMI display device has obvious difference. The default
setting is 16.
STATUS
GVC3200 Status page lists GVC3200’s account status, peripheral status, network status, system info
status, remote control status.
ACCOUNT
• Account
Account name.
• Number
SIP User ID for the account (if applicable).
• Status
Display registration status for the SIP account. There are two statuses: Registered, Unregistered.
PERIPHERAL
• Zoom
Display the current camera zoom, for example 12x Optical Zoom.
• VGA In
Display whether VGA Input device is connected or not.
• HDMI In
Display whether HDMI input device is connected or not.
• HDMI Output 1
Display whether HDMI output 1 device is connected or not.
• HDMI Output 2
Display whether HDMI output 2 device is connected or not.