Grandstream GVC3200 Administration Guide - Manual (Page 53)

Firmware Version 1.0.1.5 GVC3200 Administration Guide Page 52 of 61
Log Priority
It is used to select the log priority to display. It can be selected from the following:
• Verbose
• Debug
• Info
• Warn
• Error
• Fatal
• Silent (suppress all output)
The default setting is “Verbose”.
Debug
Capture Trace
Press the START button to start capturing a trace, and press STOP to stop the
capture process. The default setting is close.
Trace List
Selects the existing capture file. Press the DELETE button on the right to delete the
file.
View Trace
Click the LIST button to view the traces, which are ranked in time order when the
traces were captured .Click the trace name to download it to PC. The captures files
are saved in FileManager->SD Card->ppp file.
Syslog
Syslog Server
Address
The URL/IP address for the syslog server.
Syslog Level
Selects the level of logging for syslog. The default setting is "None". There are 4
levels: DEBUG, INFO, and WARNING AND ERROR. Syslog messages are sent
based on the following events:
a) product model/version on boot up (INFO level);
b) NAT related info (INFO level);
c) sent or received SIP message (DEBUG level);
d) SIP message summary (INFO level);
e) inbound and outbound calls (INFO level);
f) registration status change (INFO level);
g) negotiated codec (INFO level);
h) Ethernet link up (INFO level);
i)
SLIC chip exception (WARNING and ERROR levels);
j) Memory exception (ERROR level).
Ping
Target Host
Enter the target host and press "Start" to ping the host address. This can be used to
test the reachability of a host in the network and measure the round-trip time for
messages sent from the GVC3200 to the destination host.
Traceroute