Grandstream GVC3200 Administration Guide - Manual (Page 45)

Firmware Version 1.0.1.5 GVC3200 Administration Guide Page 44 of 61
HTTP/HTTPS
Proxy Hostname
It is used to configure the HTTP/HTTPS proxy URI of the network. Some of networks
require going through a proxy to access to the Internet. The default setting is
keeping this field blank.
HTTP/HTTPS
Proxy Port
It is used to configure the HTTP/HTTPS proxy port number of the network. Some of
networks require going through a proxy to access to the Internet. The default setting
is keeping this field blank.
Bypass Proxy For
It is used to define the specific URI that the phone can directly access to without
HTTP/HTTPS proxy. If it is filled, the phone will bypass the proxy to send the
packets to the specific URI. The default setting is keeping this filed blank.
Advanced Settings
Alternate DNS
Server It is used to configure the alternate DNS IP address to failover during the default
DNS server’s outage.
Secondary DNS
Server It is used to configure the secondary alternate DNS IP address to failover during
both the default DNS server and alternate DNS server’s outage.
User-Agent
It is used to configure the User Agent URI to download phonebook and screensaver
files.
SETTINGS/PERIPHERAL
Peripheral section on Web page is the same on local LCD. Please refer to Peripheral in chapter
GVC3200 LCD Settings.
SETTINGS/CALL FEATURES
Parameters Descriptions
Start Video
Automatically
It is used to set if the GVC3200 system will enable the video feature automatically
when it makes an outbound call. If set to "Yes", the video codec attributes will be
included in the SIP INVITE message. Or the attributes will not be included. The
default setting is "Yes".
Always Ring
Internal ringer If set to "Yes", the device will always ring internal speaker. The default setting is
“No”.
Disable Call-
Waiting
It is used disable call waiting feature. If it is checked, the GVC3200 system will reject
the second incoming call during an active session without user’s knowledge. But this
missed call record will be saved to remind users. The default setting is "No".
Disable DialPlan
Defines whether to disable DialPlan in dial screen, contacts, incoming call and
outgoing calls and MPK. The default setting is “No”.
Disable Call-
Waiting Tone If set to "Yes", call waiting tone will be disabled when there is a new call during
active call. The default setting is "No".