Gasboy Magnetic Card Encoder - Manual (Page 39)

MDE-4507 Magnetic Card Encoder User’s Manual · June 2006 Page 8-3
Configuring COM Port Settings Other Options
Accessing “About Gasboy Card Encoder” Details
1 From the Gasboy Card Encoder Main screen, select Help - About Gasboy Card Encoder.
The About Gasboy Card Encoder dialog box appears, displaying the MCE version and the
Database Version.
2 To access System Information, click System Information. The System Information dialog
box appears, displaying the current system's information.
About MCE Status Messages
Tabulated below are some Encoder status messages ( Figure 8-4 ), their description and
suggested user action for each message that appears on the Code Card Login screen.
Figure 8-4: Encoder Messages
Message Description/ Suggested User Action
Read or Write Ok Successfully read or write to the card.
No response
Reset action failed Power off on the Encoder Hardware.
Or
Serial connector disconnected.
CTS control line was turned off Power off on the Encoder Hardware.
Or
Serial connector disconnected.
VRC error Defective magnetic card. Try another card.
STC error Card was placed into the Encoder incorrectly. Try
again with the same card inserted with the
magnetic strip in the correct position.