Gasboy Magnetic Card Encoder - Manual (Page 18)

Working with MCE Creating a Card Layout
Page 4-2 MDE-4507 Magnetic Card Encoder User’s Manual · June 2006
Creating a Card Layout
This version of the software allows the creation of only one card and PIN layout configuration
at a time. To navigate to the MCE Card Layout window, proceed as follows:
1 Click File>Create New Card Layout >Card Layout ( Figure 4-2 ). The Gasboy Card Encoder
- Create New Card Layout window appears ( Figure 4-3 ).
Figure 4-2: Gasboy Card Encoder Screen
Figure 4-3: Gasboy Card Encoder - (Create New Card Layout)