Gasboy Magnetic Card Encoder - Manual (Page 37)

MDE-4507 Magnetic Card Encoder User’s Manual · June 2006 Page 8-1
Changing the Password Other Options
8 – Other Options
Changing the Password
You can change the MCE password using one of the following methods:
Method 1
1 On the main screen, click Options>Change Password. The Change Login Password dialog
box appears.
Figure 8-1: Change Login Password Dialog Box
2 Enter the new password twice in the fields provided in the dialog box, and click OK.
Note: The length of the password should be between one and ten characters. You can use
numbers, upper and lower case letters, and special characters.
Note: If you enter more than ten characters and attempt to save the password, the following
message appears.
Figure 8-2: Invalid Password Message