Gasboy Magnetic Card Encoder - Manual (Page 26)

Working with MCE Creating a Card File
Page 4-10 MDE-4507 Magnetic Card Encoder User’s Manual · June 2006
Creating a Card File
After you have created and saved a new layout, you should create a Card File.
1 To create a new card file, click File>Create New Card File ( Figure 4-19 ). A message window
appears to confirm if you want to create a new card file ( Figure 4-20 ).
Figure 4-19: Gasboy Card Encoder - Create New Card File Option
Figure 4-20: Create New Card File Dialog Box
2 Click Yes. All previous records are erased and the following dialog box appears.
Note: If you click No, a new card file will not be created.
Figure 4-21: New Card File Created Dialog Box
3 Click OK.
Note: You can also create a card file during the process of creating your layout, see section
“Loading a Card Layout” on page 4-8 .
This erases all previously entered information in the Card File. Therefore, unless you plan
to start over with a new card file, you should not use this feature.
IMPORTANT INFORMATION