Gasboy CFN Series Gilbarco CRIND PC Interface for Site Controller III User Manual

Page 28

http://www.gasboy.com

· Printed in the U.S.A.

MDE-4337G Gilbarco® CRIND® PC Interface for Site Controller III with Windows® · February 2011

Buypass

is a service mark of Buypass Inco Corporation. CRIND

, Eclipse

, Encore

, Gilbarco

, G-SITE

, GSM

, and InfoScreen

are registered

trademarks of Gilbarco Inc. FlexPay

™

is a trademark of Gilbarco Inc. Paymentech

™

is a trademark of Paymentech LLC. Tokheim

is a registered

trademark of Tokheim Holding B.V. Corporation. Unitec

is a registered trademark of Unitec. Wayne

is a registered trademark of Dresser Industries

Inc. Windows

, Windows NT

, and Windows XP

are registered trademarks of Microsoft Corporation.

Troubleshooting

Mapping of FlexPay EPP Keypad Using the CRIND Diagnostic Card

The diagram of the keypad layout loaded in the FlexPay EPP keypad by the factory is as
shown in

Figure 7-1

. This is only an illustration and it varies based on the part number that

was ordered. You can see row and column numbers assigned to each key of the FlexPay EPP
keypad. This allows you to create a string for the sys_par keypads: setting. This keypads string
must be 123uY456uN789uuC0EuuHXuW.

Figure 7-1: FlexPay EPP Keypad Layout - Example Only

ADA

R4C6

ADA

R4C6

QZ
1

R1C1

ABC
2

R1C2

DEF
3

R1C3

YES
receipt

R1C5

GHI
4

R2C1

JKL
5

R2C2

MNO
6

R2C3

R2C5

PRS
7

R3C1

TUV
8

R3C2

WXY
9

R3C3

CANCEL

R2C6

CLEAR

R4C1

R4C2

ENTER
OK

R4C3

HELP
ADA

R1C6
R4C6

This chart shows the Auxiliary (options)
mapping for keypad diagnostics.
Note: It is usually not present in the unit.

This chart shows the FlexPay EPP mapping for
keypad diagnostics.

Customer whose POS supplier has standardized on the default graphics mapping with double wide high ADA Auxiliary keypad.

Note: This Figure is an example of a FlexPay EPP keypad mapping that is shipped with replacement units and this is NOT

the typical GASBOY layout. This is supplied as a sample ONLY.