Gasboy CFN Series Gilbarco CRIND PC Interface for Site Controller III - Manual (Page 17)

MDE-4337G Gilbarco® CRIND® PC Interface for Site Controller III with Windows® · February 2011 Page 13
Softkeys Softkey and Animation Sequences
5 – Softkey and Animation Sequences
The graphic CRIND device (Gilbarco’s InfoScreen) is capable of displaying several softkey
screens and animation sequences. To use them, embed the specified ~ sequence in the text or
prompt. Any display message (or prompt) may contain graphic animation sequences. The
fixed DPT messages already have these (site V3.0B+), but you may want to add to the
messages loaded in the reader configuration.
For example,
• If you want to use the card animation sequence with the Insert Card prompt, use the
sequence Insert Card~C.
• You may use a softkey and one animation sequence together. For example, Insert
Card~C~c uses both the card animation AND cancel/help softkeys.
Softkeys
~s = start/cancel/help
~p = payment type
~c = cancel/help
~q = Yes/No
~h = enter/cancel/help
~d = dollar preset (use with Enter the Amount step in reader configuration)
~M = merchandise
~m = show softkeys for CASH, CREDIT, CANCEL, and HELP
If softkeys are being used, the top center part of the display will be used to show the prompts
from the Site Controller reader program configuration or messages defined in the parameter
file CRIND.axx (refer to
“PC Applications” on page 15 ). Prompts can be displayed on the
second line down from the top (refer to DISPLAY_OFFSET parameter on page 17 ).
Animation Sequences
~C = insert card
~w = car wash
~R = receipt printing
~$ = cash
~N = remove nozzle
~n = replace nozzle
~l = lift lever
~L = remove nozzle and lift lever