Gasboy 9800Q Series - Manual (Page 65)

MDE-4340A Series 9800Q Pumps and Dispensers Installation/Operation Manual · January 2006 Page 6-1
Pump/Remote Dispenser Operation
6 – Pump/Remote Dispenser Operation
Overview
This section describes the operation of the pump/remote dispenser. It shows how to access the
electronic components, setting the internal switches, the optional battery back-up power
supply, the procedure for viewing and resetting the electronic totalizers using the actuator, and
the operating sequences for both pumps and remote dispensers.
Electronic Component Access
Before attempting to start-up the 9800Q, it is important to become familiar with the location of
some key components as well as the various switch-selectable operating modes.
1 Unlock and remove the front panel.
2 Remove the two bolts located over the tabs of the bezel assembly. Lift the bezel assembly
upwards and pull out to remove.