Gasboy 9800Q Series - Manual (Page 5)

MDE-4340A Series 9800Q Pumps and Dispensers Installation/Operation Manual · January 2006 Page 1-1
Introduction
1 – Introduction
Purpose
The Gasboy Series 9800Q Pumps and Dispensers Installation/Operation Manual is provided to
assist the installer in installing and operating the unit. This manual should be supplied to the
electrician prior to the installation of conduit and wiring to ensure that the Series 9800Q
dispensing unit is installed properly. Faulty installations are the major cause of unit
malfunctions. The unit must be installed and operated as described in this manual to ensure the
reliability and proper operation of the Series 9800Q dispensing unit. In addition to installation
information, this manual contains warnings, safeguards and procedures on the use and care of
the Series 9800Q pumps and remote dispensers. Ensure that you leave this manual with the
pump/remote dispenser owner after the installation is complete.
Note: Customers and installers having any questions pertaining to the installation should
contact their Gasboy distributor.
This manual provides instructions for safely operating, programming, and maintaining the
Atlas™ Fuel Systems pumps/dispensers.
General Description
The Gasboy Series 9800Q dispensing units are UL ® -listed and are available in a self-contained
(suction pump) package or in a remote-controlled (remote dispenser) package. Both packages
offer a variety of models which are available as single hose outlets or dual hose outlets (with
single or dual product capability). The self-contained models are available in standard speed
(up to 15 GPM/56 LPM) or in high speed (up to 22 GPM/83 LPM). The self-contained
package also boasts a single hose model with high capacity speed (up to 26 GPM/98 LPM), a
dual flow unit (up to 40 GPM/151 LPM) and a high flow unit (up to 50 GPM/189LPM). The
rate of delivery for the remote-controlled packages will vary according to the size of the
submersible pump. The delivery rate of both packages will also vary depending upon
installation conditions and added accessories.
The Series 9800Q offers the following features:
Suction Pumps Remote Dispensers Features
Standard
Speed
Models 9852Q
9852QTW1
9852QTW2 9852QX
9852QXTW1
9852QXTW2 Inlet: 1-1/2" NPT
Discharge: 3/4" NPT (female threads)
Motor: 3/4 HP continuous duty
Valves (when used): 3/4"
High Speed
Models 9853Q
9853QTW2
9853QTW1M 9853QX
9853QXTW1
9853QXTW2 Inlet: 1-1/2" NPT
Discharge: 1" NPT (female threads)
Motor: 3/4 HP continuous duty
Valves (when used): 1"
Super
Speed
Model (up to
40 GPM) 9840Q 9840QX Inlet: 2" NPT
Discharge: 1-1/4" NPT (female threads)
with 1-1/4"x1" reducer bushing
Motor: two 3/4 HP continuous duty
Valves (when used): 1-1/2"