Formax 6304 Series - Manual (Page 59)

57
ENGLIS
H
Optical Mark
Recognition
(OMR) Optical Mark Recognition is intended for reading and interpreting
printed codes. These codes are one or more black marks which are
read from a document. These marks give information to the inserting
system about how to build-up and handle a set.
Reading error Condition in which the system could not reliably read or interpret the
OMR reading marks or barcode from a sheet.
Reading marks Marks added to documents containing finishing instructions that can
be identified by an reading head and interpreted according to the used
OMR code definition.
Remote
diagnostics The feature that makes it is possible to analyze a problem on an
inserting system from a remote location.
Service engineer Technical engineer whose task it is to resolve problems with systems
in the field. Besides dealing with problems, service engineers are also
responsible for preventive maintenance.
Single fold A single fold implies the document set is folded once. The fold position
is adjustable. This fold is illustrated in the picture below:
Stacker Used as storage for filled envelopes.
Stop counter Counter which sets the amount of envelopes to be filled. After filling
this amount of envelopes the system will stop.
Supervisor Person who is responsible for the technical state of the system.
Normally a supervisor has access to programming functions, which are
restricted for standard users.
Test run A test run is intended to validate the settings of the inserting system:
•
Inspect and adjust the stop position of the envelope.
• Check the fold settings for one set.
• Check whether the address is correctly positioned behind the
envelope window.
Term Description