Formax 6304 Series - Manual (Page 30)

28
4. Press Save to save the job with the entered settings under the specified job number
and name.
To name a job, see 4.2.6 ”Job Name” on page 26.
5. Press the 1x button to verify that the insert position and address position are correct
(see 7.3.1 ”Insert Position” on page 49 and “Address Position” on page 49).
4.4 Copy a Job
To copy existing job settings to a new job:
1. Press the Supervisor menu button from the
main menu.
2. Enter the pin code 2546.
3. Press the
Job menu button.
The ‘job menu’ opens.
4. Press the Copy job button.
The ‘copy job’ menu appears.
5. Press the arrows if you want to select another
job number to copy from or to copy to.
Note
You can only copy job settings to new jobs.
6. Press for details of the job to copy from.
7. Press OK to copy the job settings.
If all jobs are programmed the touch screen shows “No more free jobs”.
It is possible to copy an Automatic job into a job. Before an Automatic job can be copied,
it has to be defined successfully (see 3.8 ”Using an Automatic Job") on page
18).
4.5 Delete a Job
To delete an existing job:
1. Press the Supervisor menu button from the
main menu.
2. Enter the pin code 2546.
3. Press the
Job menu button.
The ‘job menu’ opens.
4. Press the Delete job button.
The ‘delete job’ menu appears.
5. Select a job number and press OK . The job will
be deleted without a warning.