Formax 6304 Series - Manual (Page 27)

25
ENGLIS
H
Note
The touch screen will indicate when entered positions are out of range.
4.2.4 Reading Settings (Option)
For a full function description of reading, see
5.2 ”Reading” on page 29. In the ‘reading settings’
menu it is possible to enable or disable the Optical
Mark Recognition (OMR) or Barcode Reading (BCR)
function and to adjust the basic settings.
The first ‘reading settings’ menu covers the following
settings:
• Code type: default is the setting ‘none’: reading
is disabled.
Change the setting with the button. The
following codes are possible:
-
1-track OMR codes
- BCR for reading barcodes
- Flex 1-9 for reading customer specific codes (only if flex dongle is installed)
• Read from feeder: press the button to select a feeder to activate reading on.
By pressing the button the next reading
settings menu appears. This menu covers the
following settings:
• 1st mark from top: press to set the
position of the first optical mark, measured
from top of the sheet. The value can be varied
between 15 mm (0.6 inch) and 277 mm
(10.9 inch). If you selected BCR, a second
keypad is available to enter the length of the
code.
• Max. sheets: use the arrow buttons to select the maximum amount of sheets in the
set of documents.