Formax 6304 Series - Manual (Page 15)

13
ENGLIS
H
3.2.2 Slide and Envelope Catch Tray
To attach the slide and envelope catch tray:
1. Attach the slide as shown in the figure.
2. Position the envelope catch tray into the holes
underneath the envelope hopper as shown in the
figure.
The distance A should be approximately 1.5 x
the envelope height.
3.3 Starting Up
To start up the system:
1. Connect the system to the mains power supply.
2. Use the power switch to switch the system on.
The power switch is located at the back of the
system.
The software will ask you to select the required
language.
3. Select the required language for the touch
screen.
The software will ask you if you want the “select
language option” to be displayed every time the
system is switched on.
4. Select either Yes or No .
5. Press the OK button.
The touch screen shows the home menu.
A