Formax 6304 Series - Manual (Page 22)

20
4. JOB PROGRAMMING
4.1 Create a Job
To create a new job:
1. From the ‘home’ menu, press the New job button.
2. Press Manual to create a new job.
For Automatic , see “Using AutoSet” on page 18.
3. Enter the pin code 2546.
4. Press
Wizard to create a new job with the job
creation wizard or press Advanced (experienced
users only).
If you use the job creation wizard, follow the
steps on screen. The system stores the new job
under the lowest free job number.
You can manually select a free job number to
save the new job. The screen will show the
lowest free job number.
If you use the advanced way of job
programming, continue as follows:
5. Press OK to confirm the selected free job number.
Note
A new selected job number starts with default settings.
The ‘job settings’ menu opens. The meaning of all buttons and settings is explained in
4.2 ”Job Settings” on page 21.
6. Press Save to save the job with the entered settings under the specified job number
and name.
To name a job, see 4.2.6 ”Job Name” on page 26.
7. Press the 1x button to verify that the insert position and address position are correct
(see 7.3.1 ”Insert Position” on page 49 and “Address Position” on page 49).