Formax 6304 Series - Manual (Page 25)

23
ENGLIS
H
Note
The maximum number of sheets in a set is 25. When folding is used the maximum set
thickness is 8 sheets in letter fold and 10 sheets (80 gr./m2) in single fold.
• Press to enter the document height. The height or the ISO format of the
document will be displayed next to the relevant feeder.
- Press to select a feeder. The selected feeder is highlighted.
- Press to show a numeric keypad to enter the exact dimension of the
document.
Dimensions can be entered in mm, inches or as standard ISO paper dimensions
(depending on installation settings). The system will not allow entering
dimensions out of technical ranges. The document size can be set between 90
mm (3.54 inch) and 356 mm (14 inch).
The default document size setting of a new job is 297 mm (11.7 inch).
• Press to link two feeders. This function enables to fill two adjacent feeders with
the same documents. When the first feeder is empty, the system automatically swaps
to the other feeder.
- Press to select two adjacent feeders. The selected feeders will be
highlighted.
- Press to link two highlighted feeders.
The will be displayed between the selected feeders.
Note
When linking two feeders, the program will automatically apply the number and format of
the documents of the lowest feeder to the other feeder.
Note
When a feeder is selected for reading, the feeder below can not be linked to this reading
feeder. The reading feeder can be linked to a feeder above when it is not selected for
selective feeding.
• Press to enter the setting of the daily mail function.
This function enables to process documents or sets of documents, which can not be
processed automatically (see 3.9 ”Daily Mail” on page 18). The upper feeder is
automatically selected.