Formax 6304 Series - Manual (Page 47)

45
ENGLIS
H
7.2 Clearing Jams
Jams can occur in the following areas:
A Folder and feeder
B Collating area
C Envelope track and inserter area.
7.2.1 Folder or feeder
When a jam occurs in the folder or the feeder,
remove the documents as follows:
1. Open the upper unit A by pulling up the handle.
2. Remove the documents from the folder or the
feeder.
3. Close the upper unit A.
4. Press
Reset to reset the error and restart the
job.
7.2.2 Collating Area
When a jam occurs in the collating area, remove the documents from the collating
area as follows:
1. Move the collator plate B down.
2. Remove the documents.
3. Move the collator plate B up in position.
4. Press
Reset to reset the error and restart the job.
7.2.3 Lower Envelope Track
When a jam occurs in the lower envelope track,
remove the envelopes as follows:
1. Open the side cover C.
2. Pull down the blue handle D and remove the
envelope(s) from the lower envelope track.
3. Close the side cover.
4. Press
Reset to reset the error and restart the
job.
If necessary, the envelopes and documents can be
transported manually:
• Turn the blue knob E clockwise to transport an
empty envelope to the insert position.
• Turn the blue knob F clockwise to transport the filled envelopes to the exit.
B C
A
C
D
F
E