Formax 6304 Series - Manual (Page 18)

16
3.4.4 Filling the Document Feeder Tray
To fill the document feeder tray:
1. Turn the left-hand side guide A downwards.
The feed rollers are lifted automatically.
2. Place a stack of documents between the side guides.
Feed the documents (depending on the type of documents and the type of fold) as
shown in 3.4.1 ”Document Orientation” on page 14.
3. Turn the left side guide upwards again.
3.5 Loading Envelopes
To load the envelopes:
1. Adjust the side guides C with thumb wheel D so,
that the envelopes:
-
Fit exactly between the side guides
- Can move freely
Note
If the distance between the side guides is too
large, the envelopes will twist sidewards, when
transported into the system.
Note
If you use the optional High Capacity Vertical
Stacker, also adjust the side guides of this
stacker (see “Adjusting the Side Guides” on
page 42).
2. Set the envelope separation as follows:
a Pull down small lever A.
b Insert one envelope horizontally up to the stoppers.
c Return l ever A.
3. Place the bottom envelope between the rollers
(flap down and trailing - bottom side of envelope
pointing to the system).
4. Loosen the stack of envelopes and place the
stack on top of the bottom envelope.
D C A
B
C