Formax 6304 Series - Manual (Page 20)

18
3.8 Using AutoSet
If you do not want to define a job and just want to do some inserts, you can let the
system determine the job settings for you.
This ‘automatic’ job determines automatically its job settings by measuring the sizes of
documents and envelope. One sheet will be taken from all feeders that are loaded. Based
on the maximum document length (which is also the length of the document set) and the
length of the envelope, the fold type is determined.
Note
AutoSet cannot be used together with linked feeders, multifeed, daily mail and
reading functionality.
The AutoSet is not possible in the no envelopes mode or with usage of
envelopes with open flap.
In AutoSet only the Double Feed Control (DFC) of the upper feeder is selected.
Note
Before starting an AutoSet job, be sure that no documents or envelopes are left in the
system.
To start an AutoSet job:
1. From the ‘home’ menu, press the New job
button.
2. Press the Automatic button.
3. Load envelopes.
4. Load the documents face up and leading.
Place the address carrier in the upper feeder.
5. Press the 1x button to start a test run (see
3.7 ”Run a Job” on page 17) or press the
button to start the job.
6. If you press the Save button you can copy this job to a job number.
3.9 Daily Mail
To process documents or sets of documents, which can not be processed automatically
(e.g. stapled documents), the top feeder is equipped with a daily mail switch.
To use the Daily Mail function:
1. Select a job where the daily mail function is selected. You can recognize the daily mail
by the icon in the job information menus.