Formax 6304 Series - Manual (Page 54)

52
Remarks:
• Maximum insert specifications are based on single sheets. When multiples are
handled, more room inside the envelope is needed depending on the application.
• The specification of the paper handling equipment is often wider than that of the
envelopes and documents handled. The condition of material handled will limit the
specified environmental conditions.
• We recommend that materials to be handled are stored at a temperature of 20°C
(68°F) with a relative humidity factor of 50%. If difference in temperature occurs
between store room and mailing area, the material has to be stored near the system
at least 24 hours before use.
• Self-copying paper may cause rubber parts to wear quicker. The rubber used in this
system has the best resistance to Wiggins Teape material.
8.6 Specifications High Capacity Vertical Stacker
Model HCVS-1
Type high capacity vertical stacker
Suitable for all kinds of mail sets that consist of at least one 80
grams envelope and one folded document (80 gram).
Power consumption low voltage supplied by the inserter system
Approvals EMC Certificate conform EMC-Directive.
FCC Certificate conform 47CFR, part 15.
UL Listed I.T.E. (Information Technology Equipment),
conform UL-IEC 60950-1, file: E153801.
Conform NEN-EN-IEC 60950-1 and derivatives.
Height
Width
length 550 mm(21.7 inch)
440 mm (17.3 inch)
360 mm (14.2 inch)
Weight 12 kg (26.5 lbs)
Noise level see 8.3 ”Other Specifications” on page 50
Operating
temperature 10°C - 40°C (50°F-104°F)
Humidity 30%-80%
Stacker capacity 325 envelopes, depending on application