Formax 6304 Series - Manual (Page 32)

30
5.2.2 Adjust Reading Head Position
The horizontal position of the reading head must be adjusted to the same position of the
printed marks on the documents.
To adjust the reading head, proceed as follows:
1. Fold a document with reading code on the first
mark.
2. Open the upper unit (see page 7).
3. Hold the document in the middle against the
ruler.
4. Shift the reading head A so it is positioned
exactly above the middle of the reading marks.
5. Divide the paper guides B along the width of the
document.
Note
When the reading head is adjusted it is possible
that paper guides have to be removed and
placed on the other side of the reading head.
A B