beautypg.com

Limitorque actuation systems – Flowserve DDC-100 Master Station II User Manual

Page 25

background image

FCD LMAIM5001-00

DDC-100 Master Station II Installation and Operation Manual

25

Flow Control Division

Limitorque Actuation Systems

8.

Tag names are limited to 8 characters. Spaces and other symbols are considered a character.

9.

Save the file in .CSV (comma separated value) format.

10. Using FTP, copy the TAGNAME file to the Active Master Station.

11. Power cycle the Master Station to load the new TAGNAME file. On power-up the new tag names will

appear on the ACTIVE Master Station.

12. For a Hot Standby Master Station, after the Active unit has been power cycled, enter the

configuration screens and save the current configuration. This will transfer the new TAGNAME file to

the Standby Master Station.

See also other documents in the category Flowserve Hardware: