Flowserve Logix MD+ ValveSight - Manual (Page 213)

ValveSight™ Diagnostics DTM Manual for Logix MD+ Positioner with HART®
FCD- LGENSF0014-00
© Flowserve Corporation
213
the Abort button
A/O Calibration in Progress
•
Definition: The analog output calibration sequence is in progress.
•
Possible Solutions: The calibration can be canceled from the Sensor
Calibration page of the DTM, from the handheld, or by briefly pressing
the Abort button
Jog Calibration in Progress
•
Definition: During a jog calibration, the unit is waiting for the user to
manually adjust the valve position to the desired 100% open position.
•
Possible Solutions: Use the Up and Down buttons on the positioner to
adjust the valve to the desired fully open position. The QUICK-
CAL/ACCEPT button to accept.