Flowserve Logix MD+ ValveSight - Manual (Page 11)

ValveSight™ Diagnostics DTM Manual for Logix MD+ Positioner with HART®
FCD- LGENSF0014-00
© Flowserve Corporation
11
Create a Field Network
HART Modem
•
If the modem is a serial port, move on to the next step
•
The USB Modem requires that you install the driver for it. Make sure you
remember what slot you put the USB Driver, in case you unplug and plug in a
different slot you will need to install the driver for the different slot.
•
Right Click on My Computer and select Manage.
•
Click on Device Manager and select Ports
•
Check what port the modem was installed
Create a Field Network
The remainder of the Quick Start Guide will give instructions on how to create a Field
Network using the fdtCONTAINER FRAME Application.
Device Catalog
Double click on the FDT Container, which is the M&M • Frame to open it. You will see
a widow on the right of the page called “Device Catalog”. At the bottom of the page,
click on Update. This should allow the Frame to identify both the COMM DTM and the
ValveSight DTM.