Epiphan VGADVI Recorder - Manual (Page 88)

VGADVI Recorder User Guide 3-3 Customize your channel
9. Select where the image appears on the broadcast page using Position and Margin values.
a. Choose a corner of the broadcast page where the image is placed:
l
left /right top
l
Left/ right bottom
b. Choose how far you want the image from the margin. For example if you chose the starting
position of left top and you want the image closer to the center of the broadcast page,
enter margin values to move the image.
If location settings are incorrect and display only part of the image; the system overrides the
incorrect settings and displays the whole image.
10. Click Apply.
To add a no signal image to a channel
This image is displayed for the channel when a signal is not detected. Setting this feature lets you communicate
broadcast information to your viewers. For example if a viewer logs in early, or if you are experiencing delays.
1. Connect to the admin interface using your preferred connection mechanism. See Connect to the Admin
Interface .
2. Login as admin.
3. From the web interface, select a channel; the menu expands.
4. Click on the Stream Branding menu option; the Stream Branding configuration page opens.
5. From the web interface, click on the Stream Branding menu option; the Stream Branding configuration
page opens.
6. Choose a “No signal” image. This image is displayed for the channel when a signal is not detected.
79