Epiphan VGADVI Recorder - Manual (Page 143)

VGADVI Recorder User Guide 5-4 Use the Local FTP Server
l
The IP address of your device (found in the Network configuration menu)
l
An FTP tool
l
The username and password for your FTP user (See Configure the Local FTP Server )
In the example below, the IP address of the VGADVI Recorder is 192.168.1.210, the username is admin, there is
no password, and the Windows command line ftp utility is used.
To connect to the FTP server:
1. Open a command window on Windows (alternatively open a terminal window on Linux/Mac, or open
your FTP utility of choice).
2. Establish an ftp connection using the command: ftp 192.168.1.210
3. Provide the username: admin (provide the username of your FTP user)
4. Provide the password: (provide the correct password for your FTP user); the connection is opened.
5. Use the dir command to see the file structure, the recordings are in the video folder.
Figure 4-1 Login to the FTP Server
6. Use get or your tool’s transfer mechanism to transfer files to your computer.
Figure 4-2 Download a file via FTP
7. If enabled in the FTP configuration page, delete the file after downloading it by issuing the delete
command, or using your tool’s delete mechanism.
134