Epiphan VGADVI Recorder - Manual (Page 71)

VGADVI Recorder User Guide 3-1 Configure channels
Independent streams are supported when the codec value is H.264 and the Video encoding
profile value is Main or High. Otherwise the option is greyed out.
9. Click the Video signal type drop-down menu to specify if the video signal from the input source is
composite or S-video.
10. To choose a background color or to add a brand, go to Customize your channel .
11. To set the frame size of the streaming video, go to Upscale or downscale your video image
12. To add a timestamp to your streaming video, go to Add a time stamp to your channel .
13. Click Apply.
Enable and disable a channel
When channels are configured as two independent streams, you can re-configure it to stream one of the
channels depending on the content you want to capture, record and stream.
To enable or disable one of the independent streams (DVI channel or Video channel), follow the steps below.
1. From the web interface, click the Stream Setup option.
2. Check or uncheck the Enable DVI channel checkbox to enable or disable the DVI channel.
3. Check or uncheck the Enable video channel checkbox to enable or disable the video channel.
4. Click Apply.
62