3 file and recording transfer, Configure automatic file upload (part 1 of 2), File and recording transfer – Epiphan VGADVI Recorder User Manual

Page 129

VGADVI Recorder User Guide

5-3 File and Recording Transfer

5-3

File and Recording Transfer

Your VGADVI Recorder can be configured to automatically upload recordings from local storage to a network

storage location or an attached USB drive.

This section discusses the following generic automatic upload topic:

And the following specific configurations based on the location of upload:

As a one-time copy

Manually

Configure Automatic File Upload (Part 1 of 2)

The VGADVI Recorder can automatically upload files to an accessible off-device storage location. Four types of

off-device storage are supported (FTP, CIFS, RSync); only one can be used at once.

Files are uploaded once (i.e. are automatically not re-uploaded during future sessions) and a log is kept

showing the file transfers. The first transfer occurs after the configured amount of time expires, or after the

current file completes recording.

Files saved before you complete automatic file upload configuration are not part of the automatic

upload. Manual file transfer is required for these files. See

To configure automatic uploads:

1. Connect to the admin interface using your preferred connection mechanism. See

2. Login as admin.

3. Select Automatic File Upload from the Configuration section; the Automatic File Upload configuration

page opens.

120

This manual is related to the following products: