Epiphan VGADVI Recorder User Manual
Page 124
VGADVI Recorder User Guide
5-1 Create Recordings
To use this feature your USB drive must be able maintain a write speed of at least 40 Mbit/sec
(5 MB/sec) throughout the recording.
For information on testing your USB drive, visit the Epiphan support page.
To configure storage directly to USB drive:
1. Connect to the admin interface using your preferred connection mechanism. See
.
2. Login as admin.
3. Select External USB Drive in the Configuration section; the External USB Drive configuration page is
displayed.
4. Select used as primary storage of recorded files from the drop down list.
5. Click Apply; the changes are saved.
If a conflict is reported regarding the Automatic file upload, go to the Automatic File Upload
configuration page and disable automatic file upload or switch it to a non-USB based
upload type. Repeat the steps above.
Ensure you have a USB drive inserted. Your next recording(s) write to the USB drive.
To stop recording the USB drive:
1. Connect to the admin interface using your preferred connection mechanism. See
.
2. Login as admin.
3. Select the External USB Drive link in the Configuration section; the External USB Drive configuration
page is displayed.
4. Select ignored from the drop down list.
5. Click Apply.
115