Stream content using upnp, Enable upnp – Epiphan VGADVI Recorder User Manual

Page 110

VGADVI Recorder User Guide

4-1 Stream your video

rtp://@226.10.24.32:7000

To view the stream when SAP announce has been set and the stream is advertised on a media player, set-top-

box or Smart TV, refer to

Viewing with SAP Announce.

Stream content using UPnP

Using the Universal Plug and Play (UPnP) networking protocol, your VGADVI Recorder can be discovered and

can stream to software and hardware media players, set-top-boxes and Smart TVs with ease. If UPnP is

enabled, the device automatically establishes communication with media players on the network.

UPnP uses MPEG-TS over HTTP with the H.264 codec and MP3 or AAC audio encoding (or no audio). You can

only access live streams or recordings that meet these requirements.

For security reasons the default behavior prevents UPnP access to live streams and recorded files.

This section covers the following topics:

Some players will not be able to access the stream or saved recordings if a view password is set. If

needed, see Removing User Passwords to clear the viewer password.

The topics in this chapter include how to enable and disable UPnP and how to control media players from the

VGADVI Recorder. To choose recordings or live streams from your media player, see

Enable UPnP

Enable UPnP to allow digital media players on the network to browse for media or live streams from your

device.

Streams and MPEG-TS recorded files must use the supported codecs: H.264 with MP3 or AAC

audio. Having a viewer password could prevent the ability to use UPnP.

To enable UPnP:

101

This manual is related to the following products: