Epiphan VGADVI Recorder - Manual (Page 166)

VGADVI Recorder User Guide 7-3 Restoring Factory Configuration
5. Click OK on the warning dialog; the device applies the factory configuration and reboots.
6. Wait for the system to reboot and begin re-configuration.
Restore Factory Configuration Manually
If you don’t remember the admin password for your VGADVI Recorder, or you want a manual method to
restore factory configuration to the device, you can follow the steps described below.
Restoring the factory settings erases all configuration items on the device. This includes all your
source settings, channels, and network settings. Recorded files are not erased.
Only proceed if you know this is what you want to do.
The VGADVI Recorder has a factory reset button located on the front of the device. Refer to the image below
for the location of the button.
To manually restore the factory configuration:
1. Power down the device, if it is on.
2. Disconnect the power to the device.
157