Epiphan VGADVI Recorder - Manual (Page 35)

VGADVI Recorder User Guide 1-3 Configure Network Settings
Label Description/Options
Current IP Address Reflects the current internet protocol address (IP address) of the system. This
value is either obtained from the DHCP server (if using DHCP) or is the configured
static IP address. The VGADVI Recorder supports IPv4 addresses. It does not
support IPv6 addresses.
Configure a Static IP Address
Your network administrator may require you to use a static IP address for your VGADVI Broadcaster Pro.
To configure a static IP address:
1. Connect to the admin interface using your preferred connection mechanism. See Connect to the Admin
Interface .
2. Login as admin.
3. Select the Network link in the Configuration menu; the network configuration page opens.
4. Select the radio button use static address, if not already selected.
5. Enter the desired IP Address and Network Mask.
Only IPv4 addresses are supported.
6. Enter the Default Gateway address. If you do not have a default gateway for your network, enter the
new static IP address of the VGADVI Recorder.
26