Epiphan VGADVI Recorder - Manual (Page 24)

VGADVI Recorder User Guide 1-1 Connect to the Admin Interface
System Action Needed
Mac OS X The Bonjour software used for service discovery is built into the Mac OS. No special
actions are needed.
Linux The Avahi implementation used for DNS-based discovery is shipped with most Linux
distributions. If necessary, check with your administrator to ensure you have the Avahi
package installed.
To access the VGADVI Recorder web interface via DNS service discovery:
1. Find the system’s serial number. It is printed on a sticker on the back of the unit.
2. Type the following string into the address bar of your web browser on your admin computer (where
is the serial number of your VGADVI Recorder):
http://.local/admin
For example: http://95dd40d5.local/admin
3. Enter the user name and password then click OK. The administrative user is ‘admin’. Initially no
password is set. To set a password follow the procedure outlined in Setting and Changing User
Passwords .
4. Optionally, navigate to the Network link under the Configuration heading and note the IP address of
the system.
15