Removing user passwords – Epiphan VGADVI Recorder User Manual
Page 31
VGADVI Recorder User Guide
1-2 User Administration
Passwords are case sensitive and can use all alpha-numeric keys in the ASCII range. Your password can be up
to 255 characters long, but should not include any spaces.
Setting a user’s password causes the user to be logged out. Be ready to log back in with the new
admin password or have operators and viewers log in with the appropriate new password. Viewers
may need to refresh their browser window or press play in their media player.
If you lose the admin password, refer to the section
.
To set a user password:
1. Connect to the admin interface using your preferred connection mechanism. See
.
2. Login as admin.
3. Select the Access passwords link in the Configuration menu; the password configuration page opens.
4. Highlight and delete the current password for your selected user (the password is currently masked as
dots).
For security reasons, the current password appears as eight dots regardless of password
length, and even if there is no password set.
5. Highlight and delete the confirmation password for the selected user.
6. Select the user’s password field and type a new password for the user.
The new password must have between 1-255 alpha-numeric characters or special characters
with no spaces. Passwords are case sensitive.
7. Select the user’s password confirmation field and confirm the new password.
8. Click Apply.
9. If you were logged in as the user whose password you just changed, you are logged out and must log
back in with the new password. If you added or changed the viewer’s password, all viewer’s stream will
pause until they log in with the new password.
If desired, you may specify multiple account passwords on the same page before clicking Apply.
Removing User Passwords
If you want to remove passwords for one or more user accounts, you may do so via the web interface. If you
don’t remember the admin password, refer to the section Overcoming Lost Passwords.
22