Ip-based access control configuration keys, Upnp configuration keys, Frame grabber configuration keys – Epiphan VGADVI Recorder User Manual
Page 189
VGADVI Recorder User Guide
7-9 Configuration Keys for Third Party APIs
IP-Based Access Control Configuration Keys
The following settings are supported for configuring allowed and denied IP addresses for the device. See
for more information on Allow and Deny lists.
Table 34
Supported IP-Based Access Configuration Keys
Key
Values
Description
allowips
string: comma-
separated list of
IP addresses and/or
ranges.
empty string("")
Specifies the IP addresses to permit access.
To restrict access, provide a list of permitted IP addresses.
To clear allowed IP restriction, set to an empty string ("").
denyips
string: comma-
separated list of
IP addresses and/or
ranges.
empty string("")
Specifies the IP addresses to deny access.
To restrict access, provide a list of denied IP addresses.
To clear denied IP restriction, set to an empty string ("").
UPnP Configuration Keys
The following settings are supported for UPnP streaming.
Table 35
Supported UPnP Streaming Configuration Keys
Key
Values
Description
share_archive
on
empty string ("")
Enables sharing of recorded files via UPnP.
To enable sharing files over UPnP, set to on.
To disable sharing files over UPnP, set to an empty string ("").
share_livestreams
on
empty string ("")
Enables sharing of the live stream via UPnP.
To enable stream sharing over UPnP, set to on.
To disable stream sharing over UPnP, set to an empty string ("").
server_name
string
Specifies the UPnP server name.
To use the device name, set to an empty string ("").
Frame Grabber Configuration Keys
The following configuration settings are supported by the device. See
for more
information on each variable.
180